View LH532100B-_207782.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LH532100B-1
FEATURES * 262,144 words x 8 bit organization * Access time: 120 ns (MAX.) * Static operation * TTL compatible I/O * Three-state outputs * Single +5 V power supply * Power consumption: Operating: 275 mW (MAX.) Standby: 550 W (MAX.) * Mask-programmable control pin: Pin 1 = OE1/OE1/DC Pin 24 = OE/OE * Packages: 32-pin, 600-mil DIP 32-pin, 525-mil SOP 32-pin, 450-mil QFJ (PLCC) 32-pin, 8 x 20 mm2 TSOP (Type I) 32-pin, 400-mil TSOP (Type II) DESCRIPTION
The LH532100B-1 is a CMOS 2M-bit mask-programmable ROM organized as 262,144 x 8 bits. It is fabricated using silicon-gate process technology.
D7 CE A10 OE/OE A11 A9 A8 A13 A14 21 22 23 24 25 26 27 28 29
32-PIN DIP 32-PIN SOP OE1/OE1/DC A16 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 GND
CMOS 2M (256K x 8) MROM
PIN CONNECTIONS
TOP VIEW
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
VCC DC A17 A14 A13 A8 A9 A11 OE/OE A10 CE D7 D6 D5 D4 D3
532100B1-1
Figure 1. Pin Connections for DIP and SOP Packages
GND
32-PIN QFJ
TOP VIEW
D6
D5
D4
D3
D2
20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 30 31 32 1 2 3 4 D0 A0 A1 A2 A3 A4 A5 A6 A7
VCC
DC
A16
A15
OE1/OE1/DC
A17
A12
D1
532100B1-7
Figure 2. Pin Connections for QFJ (PLCC) Package
1
LH532100B-1
CMOS 2M MROM
32-PIN TSOP (Type I)
TOP VIEW
32-PIN TSOP (Type II)
TOP VIEW
A11 A9 A8 A13 A14 A17 DC VCC OE1/OE1/DC A16 A15 A12 A7 A6 A5 A4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
OE/OE A10 CE D7 D6 D5 D4 D3 GND D2 D1 D0 A0 A1 A2 A3
532100B1-2
OE1/OE1/DC A16 A15 A12 A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
VCC DC A17 A14 A13 A8 A9 A11 OE/OE A10 CE D7 D6 D5 D4 D3
NOTE: Reverse bend available on request.
532100B1-3
Figure 3. Pin Connections for TSOP (Type I) Package
Figure 4. Pin Connections for TSOP (Type II) Package
2
CMOS 2M MROM
LH532100B-1
A17 30 A16 A15 A14 A13 2 3 29 28 MEMORY MATRIX (262,144 x 8)
A11 25 A10 23 A9 A8 A7 A6 26 27 5 6
A5 7 A4 8 A3 9 A2 10 A1 11 A0 12
ADDRESS DECODER
ADDRESS BUFFER
A12 4
COLUMN SELECTOR
SENSE AMPLIFIER
CE 22
CE BUFFER
TIMING GENERATOR
OUTPUT BUFFER OE1/OE1/DC 1 OE/OE 24 OE BUFFER 32 16 VCC GND NOTE: Pin numbers apply to the 32-pin DIP, SOP, QFJ, or TSOP (Type II). 13 D0 14 D1 15 D2 17 D3 18 D4 19 D5 20 D6 21 D7
532100B1-4
Figure 5. LH532100B-1 Block Diagram
PIN DESCRIPTION
SIGNAL PIN NAME NOTE SIGNAL PIN NAME NOTE
A0 - A17 D0 - D7 CE OE/OE
Address input Data output Chip enable input Output enable input 1
OE1/OE1/DC VCC GND
Output enable input Power supply (+5 V) Ground
1, 2
NOTES: 1. Active levels of OE/OE and OE1/OE1/DC are mask-programmable. Selecting DC allows the outputs to be active for both high and low levels applied to this pin. It is recommended to apply either a HIGH or a LOW to the DC pin. 2. DC = Don't care.
3
LH532100B-1
CMOS 2M MROM
TRUTH TABLE
CE OE/OE OE1/OE1 DATA OUTPUT SUPPLY CURRENT
H L L L
X L/H X H/L
X X L/H H/L
High-Z High-Z High-Z Output
Standby Operating Operating Operating
NOTE: X = H or L, High-Z = High-impedance
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL RATING UNIT
Supply voltage Input voltage Output voltage Operating temperature Storage temperature
VCC VIN VOUT Topr Tstg
-0.3 to +7.0 -0.3 to VCC + 0.3 -0.3 to VCC + 0.3 0 to +70 -65 to +150
V V V C C
RECOMMENDED OPERATING CONDITIONS (TA = 0C to +70C)
PARAMETER SYMBOL MIN. TYP. MAX. UNIT
Supply voltage
VCC
4.5
5.0
5.5
V
DC CHARACTERISTICS (VCC = 5 V 10%, TA = 0C to +70C)
PARAMETER SYMBOL CONDITIONS MIN. MAX. UNIT NOTE
Input `High' voltage Input `Low' voltage Output `High' voltage Output `Low' voltage Input leakage current Output leakage current
VIH VIL VOH VOL | ILl | | ILO | ICC1 IOH = - 400 A IOL = 2.0 mA V IN = 0 V to VCC V OUT = 0 V to VCC tRC = 120 ns tRC = 1 s tRC = 120 ns tRC = 1 s CE = V IH CE = V CC - 0.2 V f = 1 MHz TA = 25C
2.2 -0.3 2.4
VCC + 0.3 0.8
V V V
0.4 10 10 50 45 45 40 3 100 10 10
V A A mA mA mA mA mA A pF pF 1 2 2 3 3
Operating current
ICC2 ICC3 ICC4
Standby current Input capacitance Output capacitance
ISB1 ISB2 CIN COUT
NOTES: 1. CE/OE/OE1 = VIH, OE/OE1 = VIL 2. VIN = VIH or VIL, CE = VIL, outputs open 3. VIN = (VCC - 0.2 V) or 0.2 V, CE = 0.2 V, outputs open
4
CMOS 2M MROM
LH532100B-1
AC CHARACTERISTICS (VCC = 5 V 10%, TA = 0C to +70C)
PARAMETER SYMBOL MIN. MAX. UNIT NOTE
Read cycle time Address access time Chip enable access time Output enable delay time Output hold time CE to output in High-Z OE to output in High-Z
tRC tAA tACE tOE tOH tCHZ tOHZ
120 120 120 50 10 50
ns ns ns ns ns ns 1
NOTE: 1. This is the time required for the outputs to become high-impedance.
AC TEST CONDITIONS
PARAMETER RATING
Input voltage amplitude Input rise/fall time Input reference level Output reference level Output load condition
0.6 V to 2.4 V 10 ns 1.5 V 0.8 V and 2.2 V 1 TTL + 100 pF
CAUTION
To stabilize the power supply, it is recommended that a high-frequency bypass capacitor be connected between the VCC pin and the GND pin.
tRC
A0 - A17 tAA (NOTE) CE tACE (NOTE) OE/OE1 OE/OE1 tOE (NOTE) tOHZ tOH tCHZ
D 0 - D7 NOTE: The output data becomes valid when the last intervals, tAA, tACE, or tOE, have concluded.
DATA VALID
532100B1-5
Figure 6. Timing Diagram
5
LH532100B-1
CMOS 2M MROM
PACKAGE DIAGRAMS
32DIP (DIP032-P-0600)
32 17
DETAIL
13.45 [0.530] 12.95 [0.510]
1 41.30 [1.626] 40.70 [1.602]
16 0.30 [0.012] 0.20 [0.008]
0 TO 15
4.50 [0.177] 4.00 [0.157] 5.20 [0.205] 5.00 [0.197] 3.50 [0.138] 3.00 [0.118] 2.54 [0.100] TYP. 0.51 [0.020] MIN. 0.60 [0.024] 0.40 [0.016] MAXIMUM LIMIT MINIMUM LIMIT
15.24 [0.600] TYP.
DIMENSIONS IN MM [INCHES]
32DIP
32-pin, 600-mil DIP
32SOP (SOP032-P-0525)
1.27 [0.050] TYP. 1.40 [0.055] 17
0.50 [0.020] 0.30 [0.012]
32
11.50 [0.453] 11.10 [0.437]
14.50 [0.571] 13.70 [0.539]
12.50 [0.492]
1 20.80 [0.819] 20.40 [0.803]
16 1.40 [0.055] 0.20 [0.008] 0.10 [0.004] 0.15 [0.006] 1.275 [0.050] 2.90 [0.114] 2.50 [0.098] 0.20 [0.008] 0.00 [0.000] 1.275 [0.050] MAXIMUM LIMIT MINIMUM LIMIT
DIMENSIONS IN MM [INCHES]
32SOP
32-pin, 525-mil SOP
6
CMOS 2M MROM
LH532100B-1
32TSOP (Type I) (TSOP032-P-0820)
0.30 [0.012] 0.10 [0.004] 32 0.50 [0.020] TYP. 17
18.60 [0.732] 18.20 [0.717]
20.30 [0.799] 19.70 [0.776]
19.00 [0.748]
1 8.20 [0.323] 7.80 [0.307]
16 0.20 [0.008] 0.10 [0.004] 1.10 [0.043] 0.90 [0.035] 1.20 [0.047] MAX. 0.425 [0.017] 0.20 [0.008] 0.00 [0.000]
0.15 [0.006]
DIMENSIONS IN MM [INCHES]
MAXIMUM LIMIT MINIMUM LIMIT
32TSOP
32-pin, 8 x 20 mm2 TSOP (Type I)
32TSOP (Type II) (TSOP032-P-0400)
0.50 [0.020] 0.30 [0.012] 1.27 [0.050] TYP.
32
17
10.40 [0.409] 12.30 [0.484] 10.00 [0.394] 11.30 [0.445]
11.00 [0.433] 10.60 [0.417]
1 21.20 [0.835] 20.80 [0.819]
16 0.20 [0.008] 0.10 [0.004] 1.10 [0.043] 0.90 [0.035] 1.20 [0.047] MAX. 0.4375 [0.017] 0.20 [0.008] 0.00 [0.000]
0.15 [0.006]
DIMENSIONS IN MM [INCHES]
MAXIMUM LIMIT MINIMUM LIMIT
32TSOP400
32-pin, 400-mil TSOP (Type II)
7
LH532100B-1
CMOS 2M MROM
32QFJ (QFJ032-P-R450)
29 21
30
20
1
11.40 [0.449]
12.50 [0.492] 12.30 [0.484]
10.90 [0.429] 10.10 [0.398]
4
14
5 14.00 [0.551] 15.10 [0.594] 14.90 [0.587]
13
0.25 [0.010] 1.20 [0.047] 1.20 [0.047] 3.50 [0.138] 2.30 [0.091] 3.10 [0.122] 1.90 [0.075]
1.27 [0.050] TYP.
0.56 [0.022] 0.36 [0.014] 13.50 [0.531] 12.70 [0.500]
DIMENSIONS IN MM (INCHES)
MAXIMUM LIMIT MINIMUM LIMIT
32QFJ450
32-pin, 450-mil QFJ (PLCC)
ORDERING INFORMATION
LH532100B Device Type X Package -1 120 ns Version D N U T S SR 32-pin, 600-mil DIP (DIP032-P-0600) 32-pin, 525-mil SOP (SOP032-P-0525) 32-pin, 450-mil QFJ (PLCC) (QFJ032-P-R450) 32-pin, 8 x 20 mm2 TSOP (Type I) (TSOP032-P-0820) 32-pin, 400-mil TSOP (Type II) (TSOP032-P-0400) 32-pin, 400-mil TSOP (Type II) Reverse bend (TSOP032-P-0400)
CMOS 2M (256K x 16) Mask-Programmable ROM Example: LH532100BD-1 (CMOS 2M (256K x 8) Mask-Programmable ROM, 32-pin, 600-mil DIP)
532100B1-6
8

▲Up To Search▲

Price & Availability of LH532100B-

	To Download LH532100B- Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .